ESIE16-03B | Part 5. Appendix 5.1. Field settingSA R32 Sky-Air RZAG-L22/08/16 | Version 1.1 Page 995.1. Field setting5.1.1. Indoor unit5.1.1.1. Retrieve field settings BRC1E1. Press and hold Cancel button for 4 seconds or more. Field setting menu is displayed.2. Select Field setting list in the field setting menu, and press Menu/Enter button.Field setting list screen is displayed.3. Highlight the mode, and select desired “Mode No.” by using ▲▼ (Up/Down) button.4. In the case of setting per indoor unit during group control (When Mode No. such as 20, 21, 22, 23, 25 are selected), highlight the unit No. and select “Indoor unit No.” to be set by using▲▼ (Up/Down) button. (In the case of group total setting, this operation is not needed.)In the case of individual setting per indoor unit, current settings are displayed. And, Second Code No. “-” means no function.5. Highlight Second Code No. of the First Code No. to be changed, and select desired “Second Code No.” by using ▲▼ (Up/Down) button. Multiple identical mode number settings areavailable.In the case of group total setting, all of Second Code No. which may be set are displayed as “*”.“*” is changed to Second Code No. to be set. And, Second Code No. “-” means no function.(1)(2)(3)(4)(5)(3)(5)(6)(7)In the case of individualsetting per indoor unitSecond Code No.Press Menu/Enter button.In the case of group totalsettingPress Menu/Enter button.First Code (SW) No.Press Menu/Enter button.
