Daikin SkyAir RZQ-P Series Service Manual

Also see for SkyAir RZQ-P9 Series: Service manual Engineering data Engineering data

Contents

Daikin SkyAir RZQ-P Series Service Manual Manual pdf 85 page image

SiUS28-902_B Troubleshooting by Remote ControllerService Diagnosis 772.2 Self-diagnosis by Wired Remote Controller2.2.1 BRC1D71If operation stops due to error, the remote controller’s operation LED blinks, and error code isdisplayed. (Even if stop operation is carried out, error contents are displayed when theinspection mode is entered.) The error code enables you to tell what kind of error causedoperation to stop. Refer to P.86 for error code and error contents.Note:1. Pressing the INSPECTION/TEST button will blink the check indication.2. While in check mode, pressing and holding the ON/OFF button for a period of 5 seconds ormore will clear the failure history indication shown above. In this case, on the codes display,the error code will blink twice and then change to “00” (=Normal), the Unit No. will change to“0”, and the operation mode will automatically switch from check mode to normal mode(displaying the set temperature).Operation LEDON/OFF buttonError codeInspection displayInspection/Test buttonDisplay of indoor unit forwhich an error has beendetected 27