Daikin VRV System R-22 PLUS Series Manual

Contents

Daikin VRV System R-22 PLUS Series Manual Manual pdf 23 page image

SiE33-102 InstallationGeneral Information 21Brazing a) Brazing work should be carried out such that the final result is directed either downwards or sideways.An upward direction should be avoided wherever possible. (to prevent leakage)b) Liquid and gas pipe branches should always be dealt with in the specified way with attention being paidto the direction of the fitting and its angle. (to prevent oil return or drift) For example see page 122.c) It is standard working practice to use the nitrogen replacement method when brazing.Important points1. Every effort must be made to avoid fire. (Clean area where brazing is to be performed and make surethat fire fighting equipment and water are ready to hand.)2. Be careful of burns.3. Make sure that the gap between the pipe and the joint is correct. (To prevent leaks)4. Is the pipe adequately supported? As a rule the gaps between supports for horizontal piping (copper pipe) are as follows: The copper pipe should not be secured directly by metal brackets.Copper pipe support spacing (From HASS 107-1977)Nominal diameter 20 or less 25~40 50Maximum gap (m) 1.0 1.5 2.0Si33-102.book Page 21 Tuesday, June 26, 2001 3:18 PMВсе каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html