31. INTRODUCTIONCentral heating stoves provide a comfortable and easy-to-use interior aqueoussystem. These heating units combine pleasure with a fireplace view. It is anindependent heating unit that provides heat dissipation of radiators, heatdistribution to the whole house and hot water through heat exchanger or boiler.The stove body is made of steel.The ashtray is placed at the bottom of the product and a fire chamber is available.Water chamber is located on three sides (right, left and rear) of the combustionand heating area.Chimney output is placed on the upper plate of the product.The product is highly efficient due to its physical structure.It has an automatic ash discharge system.There is an easy replaceable grid system.The thermostat in the product ensures that the circulation pump preventsautomatically, thus avoids the continuous consumption of the electricity.Circulation pump works quietly and the electricity consumption is up to a lightbulb.Once the air flow is set, the system automatically starts getting fresh air throughthe mechanical thermostat. Thus, fuel savings can be ensured by using the productin the desired degree.You have a solid fuel central heating stove with European Standards QualityCertificate.Please read the user manual, carefully. It includes information on productfunctions and easy-to-use information.Use of these information increases the product quality and extend its life. You canproperly protect the fuel and the environment.Warranty of the product depends on the right use of installation and instructionsas described in the guide.We recommend you to keep this guide in order to reach the information about thecorrect use of the stove at the beginning of every winter.