Dakota Digital LED Tail Lights LAT-NR410 Installation Instructions Manual

Contents

service and repair

Dakota Digital LED Tail Lights LAT-NR410 Installation Instructions Manual Manual pdf 3 page image

12. Cut off the existing light socket as it will not be used. Do not strip the wires. Trim the wiresfrom LED assembly to appropriate length once mounted, making sure wires are routed cleanlyand securely.13. Use the supplied moisture resistant pigtail connectors* to attach the wires from the new LEDassembly to the existing vehicle harness. Insert appropriate wire from vehicle harness andmating LED assembly wire into a connector and crimp following instructions below.*For the best connection, soldering is recommended. But to simplify installation, the supplied connectors willprovide a fast weather resistant connection.The correct crimp method for the supplied connectors is:1.) Insert UNSTRIPPED wires into the connector and ensure they are all they way in byobserving the clear bottom of the connector to see the wires are touching the end.2.) Use pliers to push the blue cap down flush with the edge of the clear body, completing theconnection. The connection will only be correct if pressed firmly down with pliers.LED wires Vehicle harnessTail light Brown Brown or BlackDriver’s Turn Green Green or PinkPassenger’s Turn Green Yellow or PurpleGround Black Chassis or body14. Repeat for the other side.15. Test the tail lights, brake lights, and turn signals. If the turn signals do not flash you will needto upgrade your flasher. If you are replacing only the rear turn signals a heavy duty electronicflasher from your local parts store should be able to be used. If you are replacing both frontand rear or do not have front bulbs you will need a no-load flasher, Dakota Digital part numberLAT-NLF.SERVICE AND REPAIRDAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions orproblems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorizationnumber. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMAnumber on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone numberwhere you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no money. We willbill you after repair.Dakota Digital Limited Lifetime WarrantyDAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material orworkmanship for the lifetime of the original vehicle it was installed in, such defect(s) will be repaired or replaced at Dakota Digital’s option.This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product. This Warranty does notapply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, oraccident.This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited tothe duration of this written warranty. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with thesale of this product.4510 W. 61ST St. N., Sioux Falls, SD 57107Phone: (605) 332-6513 FAX: (605) 339-4106www.dakotadigital.comdakotasupport@dakotadigital.com©Copyright 2006 Dakota Digital Inc.

/ 3

Related manuals for Dakota Digital LED Tail Lights LAT-NR410