Piranha4 2K and 4K Dual Line Monochrome CMOS Camera 67Teledyne DALSA 03-032-20176-06Image Format Control Feature DescriptionThe follow ing table describes these parameters along w ith their view attribute and minimum camerafirmw are version required. A dditionally the firmw are column w ill indicate w hich parameter is amember of the DA LSA Features N aming Convention (DFN C), verses the GenICam Standard FeaturesN aming Convention (SFN C not show n).The Device Version number represents the camera softw are functional group, not a firmw are revisionnumber.Display Name Feature Description DeviceVersion& ViewTest Pattern TestImageSelector Selects the type of test image that is sentby the camera. Choices are either asdefined by SN FC and/ or as provided bythe device manufacturer.1.00BeginnerDFN COff Off Selects sensor video to be output fromsensorRamp Ramp Selects a grey scaleLine M irroring ReverseX 1.00BeginnerDFN COffOnOffOnVideo output in normal orderVideo output in a reverse orderPixel Format PixelFormat Output image pixel coding format of thesensor.1.00BeginnerDFN CWidth Width Width of the Image provided by thedevice (in pixels).(RO)1.00BeginnerM ax Width WidthM ax The maximum image horizontaldimension of the image. (RO)1.00BeginnerH eight H eight H eight of the Image provided by thedevice (in lines). (RO)1.00BeginnerInput Pixel Size pixelSizeInput Size of the image input pixels, in bits perpixel. (RO)1.00DFN CGuru8 Bits/ Pixel10 Bits/ Pixel12 Bits/ PixelBpp8Bpp10Bpp12Sensor output data path is 8 bits perpixel.Sensor output data path is 10 bits perpixel.Sensor output data path is 12 bits perpixel.M ultiple A OI M odeOffA ctivemultipleA OIM odeOffA ctiveTurns on an output A rea of InterestA rea of interest is offA rea of interest is on1.00BeginnerDFN CM ultiple A OI Count multipleA OICount Set the number of output area of interest1-41.00BeginnerDFN C