78 Piranha4 2K and 4K Dual Line Monochrome CMOS Camera03-032-20176-06 Teledyne DALSASerial Port Control CategoryThe Serial Port control in CamExpert allow s the user to select an available camera serial port and reviewits settings. This section also describes the Genie TS Framew ork Virtual Serial Port Driver and the use ofthe Genie TS serial port as an interface from an Ethernet netw ork to a serial port control system for otherdevices.Features listed in the description table but tagged as Invisible are usually for Teledyne DA LSA or thirdparty softw are usage—not typically needed by end user applications.Serial Port Control Feature DescriptionsThe Device Version number represents the camera softw are functional group, not a firmw are revisionnumber.Display Name Feature Description ViewBaud Rate DeviceSerialPortBaudRate Sets the baud rate used by the selecteddevice’s serial port. A vailable baud rates aredevice-specific.1.00BeginnerDFN CBaud 9600Baud 19200Baud 57600Baud 115200Baud 230400Baud 460800Baud 921600Baud 9600Baud 19200Baud 57600Baud 115200Baud 230400Baud 460800Baud 921600Baud rate is 9600Baud rate is 19200Baud rate is 57600Baud rate is 115200Baud rate is 230400Baud rate is 460800Baud rate is 921600Serial Port Parity deviceSerialPortParity Sets the parity checking type on the selectedserial port.(RO)1.00Beginner
