24 • Troubleshooting Problems Xtium-CL PX4 User's ManualFigure 6: PCI Diagnostic ProgramClicking on the Diagnostic button opens a new window with the diagnostic report. From the PCIBus Number drop menu, select the bus number that the Xtium-CL PX4 is installed in—in thisexample the slot is bus 2.The window now shows the I/O and memory ranges used by each device on the selected PCI bus.The information display box will detail any PCI conflicts. If there is a problem, click on the Savebutton. A file named ‘pcidiag.txt’ is created (in the Sapera\bin directory) with a dump of the PCIconfiguration registers. Email this file when requested by the Teledyne DALSA Technical Supportgroup along with a full description of your computer.Figure 7: PCI Diagnostic Program – PCI bus infoWindows Device ManagerAn alternative method to confirm the installation of the Xtium-CL PX4 board and driver is to usethe Windows Device manager tool. Use the Start Menu shortcut Start • Control Panel • System• Device Manager. As shown in the following screen images, look for Xtium-CL PX4 board under“Imaging Devices”. Double-click and look at the device status. You should see “This device is
