Danby D1866WE Use & Care Manual

Contents

Danby D1866WE Use & Care Manual Manual pdf 8 page image

REFRIGERATORFEATURESRefrigerator ShelvesThe shelves in your refrigerator are adjustable to matchyour individual storage needs.Storing similar food items together in your refrigeratorand adjusting the shelves to fit different heights of itemswill make finding the exact item you want easier. It willalso reduce the amount of time the refrigerator door isopen, and save energy.To remove a shelf:1. Remove all items from the shelf.2. Slide shelf straight out aligning the ëshelf stopsí oneach side of the shelf with the notches (or openings)on both sides of foodliner.3. Lift straight up. The ëshelf stopsí will slide through thenotches in the food liner.4. Slide shelf out the rest of the way.To replace a shelf:1. Slide shelf along rail of food liner.2. Align the ëshelf stopsí with the notches (or openings)on both sides of the food liner .2. Push ëshelf stopsí down through the notches.3. Slide shelf all the way to the back of the refrigerator.Crisper and Crisper CoverTo remove the crisper:1. Slide crisper straight out to the stop.2. Lift the front.3. Slide crisper out the rest of the way.Replace the crisper by sliding it back in fully past thedrawer stop.To remove the crisper cover:1. Lift cover up and slide out.2. Replace cover by fitting back of cover against backwall of cabinet. Then lower front into place.8Light BulbsTo replace interior light:1. Unplug refrigerator or disconnect power.2. Remove light shield by pulling forward slightly andpulling out.3. Replace bulb with same wattage appliance bulb.4. Replace light shield by inserting front tabs into slotsand squeezing shield lightly to insert back tabs intoslots.5. Plug in refrigerator or reconnect power.Your refrigerator is equipped with a meat tray that can bealigned to the right or left side.To adjust the meat tray from one side to the other:1. Remove the meat tray.2. Remove the shelf that holds the meat tray.Note: The meat tray has one fixed support. It is thesupport that runs down the centre of the shelf.The other support is the adjustable one.3. Using a philips (+) screwdriver, unscrew the screwlocated on adjustable support.4. Remove support and attach to preferred side of shelf.5. Place screw back into adjustable support and fasten.6. Slide meat tray back into position.Adjustable Meat Tray