4.1.2 Setting LCP Display ValuesThe display area is activated when the frequency converterreceives power from mains voltage, a DC bus terminal, oran external 24 V DC supply.The information displayed on the LCP can be customizedfor user application.• Each display readout has a parameter associatedwith it• Options are selected in the quick menu Q3-13Display Settings• Display 2 has an alternate larger display option• The frequency converter status at the bottom lineof the display is generated automatically and isnot selectable1.123 1.31.2130BT831.100.0%Off Remote Stop1 (1)0.00 kw0.00 A0.0Hz2605kWhStatusIllustration 4.2 Display ReadoutsDisplay Parameter number Default setting1.1 0-20 Reference %1.2 0-21 Motor current1.3 0-22 Power [kW]2 0-23 Frequency3 0-24 kWh counterTable 4.1 Legend to Illustration 4.24.1.3 Display Menu KeysMenu keys are used for menu access for parameter set-up,toggling through status display modes during normaloperation, and viewing fault log data.130BP045.10Status QuickMenuMainMenuAlarmLogIllustration 4.3 Menu KeysKey FunctionStatus Shows operational information.• In Auto mode, press to toggle betweenstatus read-out displays• Press repeatedly to scroll through eachstatus display• Press [Status] plus [▲] or [▼] to adjust thedisplay brightness• The symbol in the upper right corner of thedisplay shows the direction of motorrotation and which set-up is active. This isnot programmable.Quick Menu Allows access to programming parameters forinitial set up instructions and many detailedapplication instructions.• Press to access Q2 Quick Setup forsequenced instructions to program the basicfrequency controller set up• Follow the sequence of parameters aspresented for the function set upMain Menu Allows access to all programming parameters.• Press twice to access top-level index• Press once to return to the last locationaccessed• Press to enter a parameter number fordirect access to that parameterAlarm Log Displays a list of current warnings, the last 10alarms, and the maintenance log.• For details about the frequency converterbefore it entered the alarm mode, select thealarm number using the navigation keysand press [OK].Table 4.2 Function Description Menu KeysUser Interface VLT® HVAC Drive Operating InstructionsMG11AI02 - VLT® is a registered Danfoss trademark 334 4Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net