Danfoss ECL Comfort 210 Operating Manual

Also see for ECL Comfort 210: Installation guide User guide Installation guide Installation guide Operating guide

Danfoss ECL Comfort 210 Operating Manual Manual pdf 101 page image

6.8 System6.8.1 ECL versionIn ‘ECL version’ you will always be able to find an overview of thedata related to your electronic controller.Please have this information available if you need to contact yourDanfoss sales organization concerning the controller.Information about your ECL Application Key can be found in ‘Keyfunctions’ and ‘ Key overview’.Code no.: The Danfoss sales and order no.for the controllerHardware: Hardware version of thecontrollerSoftware: Software (firmware) version ofthe controllerSerial no.: Unique number for theindividual controllerProduction week: Week no. and year (WW.YYYY)Example, ECL version6.8.2 ExtensionECL Comfort 310 / 310B:‘Extension’ will offer you information about additional modules, ifany. An example could be the ECA 32 module.6.8.3 EthernetECL Comfort 296 / 310 / 310B have a Modbus/TCP communicationinterface that allows the ECL controller to be connected to anEthernet network. This allows remote access to the ECL 296 / 310 /310B controller based on standard communication infrastructures.In ‘Ethernet’ it is possible to set up the required IP addresses.6.8.4 Portal configECL Comfort 296 / 310 / 310B have a Modbus/TCP communicationinterface that allows the ECL controller to be monitored andcontrolled via the ECL Portal.ECL Portal related parameters are set here.Documentation for ECL Portal: See http://ecl.portal.danfoss.com6.8.5 M-bus configECL Comfort 296 / 310 / 310B have an M-bus communicationinterface that allows energy meters to be connected as slaves.M-bus related parameters are set here.VI.LG.P2.02 © Danfoss | 2017.11 | 101Operating Guide ECL Comfort 210 / 310, application A231 / A331