Danfoss ECL Comfort 210 Operating Manual

Also see for ECL Comfort 210: Installation guide User guide Installation guide Installation guide Operating guide

Danfoss ECL Comfort 210 Operating Manual Manual pdf 84 page image

6.3 HolidayThis section describes the function in general for the ECL Comfort210 / 296 / 310 series. The shown displays are typical and notapplication related. They might differ from the displays in yourapplication.There is a holiday program for each circuit and a holiday programfor the common controller.Each holiday program contains one or more schedules. Eachschedule can be set to a start date and an end date. The set periodstarts on the start date at 00.00 and stops on the end date at 00.00.Selectable modes are Comfort, Saving, Frost protection or Comfort7-23 (before 7 and after 23, the mode is scheduled).How to set your holiday schedule:Action: Purpose: Examples:Choose ‘MENU’ConfirmChoose the circuit selector at the topright corner in the displayConfirmChooseacircuitor'Commoncontrollersettings'HeatingDHWCommon controller settingsConfirmGo to ‘Holiday’ConfirmChoose a scheduleConfirmConfirm choice of mode selectorChoose mode. Comfort· Comfort 7–23. Saving· Frost protectionConfirmEnter the start time first and then theend timeConfirmGo to ‘Menu’ConfirmChoose ‘Yes’ or ‘No’ in ‘Save’. Choosethe next schedule, if requiredThe holiday program in the ‘Common controller settings’ is valid forall circuits. The holiday program can also be set individually in theheating or DHW circuits.The end date must be at least be one day later than the start date.84 | © Danfoss | 2018.03 VI.LG.U3.02Operating Guide ECL Comfort 210/296/310, application A217/A317