Danfoss ECL Comfort 310 Installation Manual

Also see for ECL Comfort 310: Installation guide Installation guide Installation guide Installation guide Mounting guide

Danfoss ECL Comfort 310 Installation Manual Manual pdf 45 page image

Installation Guide ECL Comfort 310, application A3672.7 Check listIs the ECL Comfort controller ready for use?Make sure that the correct power supply is connected to terminals 9 (Live) and 10 (Neutral).Check that the required controlled components (actuator, pump etc.) are connected to the correct terminals.Check that all sensors / signals are connected to the correct terminals (see 'Electrical connections').Mount the controller and switch on the power.Is the ECL Application Key inserted (see 'Inserting the Application Key').Is the correct language chosen (see 'Language' in 'Common controller settings').Is the time & date set correctly (see 'Time & Date' in 'Common controller settings').Is the right application chosen (see 'Identifying the system type').Check that all settings in the controller (see 'Settings overview') are set or that the factory settings comply with yourrequirements.Choose manual operation (see 'Manual control'). Check that valves open and close, and that required controlledcomponents (pump etc.) start and stop when operated manually.Check that the temperatures / signals shown in the display match the actual connected components.Havingcompletedthemanualoperationcheck,choosecontrollermode(scheduled,comfort,savingorfrostprotection).Danfoss District Energy VI.LG.R1.02 DEN-SMT/DK 45