Danfoss FC 300 Instruction Manual

Also see for FC 300: Operating instructions Design guide Design guide Design guide Design guide

Danfoss FC 300 Instruction Manual Manual pdf 35 page image

FC 300 Instruction ManualHow to ProgramParameter listsChanges during operation"TRUE" means that the parameter can be changed while the adjustable frequency drive is in operationand "FALSE" means that the it must be stopped before a change can be made.4-Set-upíAll set-upí: the parameters can be set individually in each of the four set-ups, i.e. onesingle parameter can have four different data values.í1 set-upí: data value will be the same in all set-ups.Conversion indexThis number refers to a conversion figure used when writing or reading by means of a variable frequency drive.Conv. index 100 67 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 -6Conv. factor 1 1/60 1000000 100000 10000 1000 100 10 1 0.1 0.01 0.001 0.0001 0.00001 0.000001Data type Description Type2 Integer 8 Int83 Integer 16 Int164 Integer 32 Int325 Unsigned 8 Uint86 Unsigned 16 Uint167 Unsigned 32 Uint329 Visible String VisStr33 Normalized value 2 bytes N235 Bit sequence of 16 boolean variables V254 Time difference w/o date TimDSee the FC 300 Design Guide for further information about data types 33, 35 and 54.* default setting ( ) display text [ ] value for use in communication via serial communication port35MG.33.A2.22 - VLT is a registered Danfoss trademark