Danfoss FC 300 Operating Instructions Manual

Also see for FC 300: Operating instructions Instruction manual Design guide Design guide Design guide

Contents

Danfoss FC 300 Operating Instructions Manual Manual pdf 41 page image

2. Scroll to parameter group 5-1* Digital Inputs andpress [OK].130BT769.105-0* Digital I/O mode5-1* Digital Inputs5-4* Relays5-5* Pulse Input14.7% 0.00A 1(1)Digital In/Out 5-**Illustration 5.10 Digital In/Out3. Scroll to 5-10 Terminal 18 Digital Input. Press [OK]to access function choices. The default settingStart is shown.5-1*130BT770.105-10 Terminal 18 DigitalInput[8]] Start14.7% 0.00A 1(1)Digital InputsIllustration 5.11 Digital Inputs5.4 International/North American DefaultParameter SettingsSetting 0-03 Regional Settings to [0] International or [1]North America changes the default settings for someparameters. Table 5.1 lists those parameters that areeffected.Parameter Internationaldefault parametervalueNorth Americandefault parametervalue0-03 RegionalSettingsInternational North America1-20 Motor Power[kW]See Note 1 See Note 11-21 Motor Power[HP]See Note 2 See Note 21-22 Motor Voltage 230 V/400 V/575 V 208 V/460 V/575 V1-23 MotorFrequency50 Hz 60 Hz3-03 MaximumReference50 Hz 60 Hz3-04 ReferenceFunctionSum External/Preset4-13 Motor SpeedHigh Limit [RPM]See Note 3 and 51500 RPM 1800 RPMParameter Internationaldefault parametervalueNorth Americandefault parametervalue4-14 Motor SpeedHigh Limit [Hz]See Note 450 Hz 60 Hz4-19 Max OutputFrequency132 Hz 120 Hz4-53 Warning SpeedHigh1500 RPM 1800 RPM5-12 Terminal 27Digital InputCoast inverse External interlock5-40 Function Relay No operation No alarm6-15 Terminal 53High Ref./Feedb.Value50 606-50 Terminal 42OutputNo operation Speed 4-20 mA14-20 Reset Mode Manual reset Infinite auto resetTable 5.1 International/North American Default Parameter SettingsNote 1: 1-20 Motor Power [kW] is only visible when 0-03 RegionalSettings is set to [0] International.Note 2: 1-21 Motor Power [HP], is only visible when 0-03 RegionalSettings is set to [1] North America.Note 3: This parameter is only visible when 0-02 Motor Speed Unit isset to [0] RPM.Note 4: This parameter is only visible when 0-02 Motor Speed Unit isset to [1] Hz.Note 5: The default value depends on the number of motor poles. Fora 4 poled motor the international default value is 1500 RPM and fora 2 poled motor 3000 RPM. The corresponding values for NorthAmerica is 1800 and 3600 RPM, respectively.Changes made to default settings are stored and availablefor viewing in the quick menu along with anyprogramming entered into parameters.1. Press [Quick Menu].2. Scroll to Q5 Changes Made and press [OK].130BB849.10Q1 My Personal MenuQ2 Quick SetupQ5 Changes MadeQ6 Loggings25.9% 0.00A 1(1)Quick MenusIllustration 5.12 Q5 Changes MadeAbout Frequency Converter P... VLT®AutomationDrive OperatingInstructionsMG33AM02 - VLT® is a registered Danfoss trademark 375 5