PVEOThe PVEO actuator is a non-proportional ON/OFF control actuator with open-loop spool control primarilyused to control simple ON/OFF work functions where a proportional control of speed or oil flow is not arequirement.PVEO Series 6• Neutral position or max. spool stroke according to control signal• 12 VDC or 24 VDC supply voltage• DEUTSCH connectors• Standard PVE pilot oil pressure of 13.5 bar [196 psi]• LED only indicating Power ON or Power OFF• CAN-interface (-CI)• Ramp (-R) or Direction Indication output (-DI) functionalityFunctionality principlePVEO-DI functionality21 0PpLVDTLED Circuit /MicrocontrollerPowerSupplyPVEO-DIABDI_BDI_ALEDUdcRamp RampSV1 SV2P109126The standard PVEO/PVEO-HP functionality includes the simplest electric circuit of the PVE actuatorprogram, using a fixed 12 VDC or 24 VDC supply voltage or signal voltage and a simple LED circuit tocontrol the LED light indicating Power ON/OFF.An energization of solenoid valve SV1 and a simultaneous de-energization of SV2 will cause the mainspool to move to the right direction and vice versa. If both SV1 and SV2 are energized or de-energizedsimultaneously, the main spool stays locked in its neutral position.Technical InformationPVG 16 Proportional Valve GroupPVG 16 Actuation© Danfoss | December 2018 BC00000211en-000901 | 77
