PVEA Series 6 Proportional Control ActuatorThe PVEA actuator is a proportional control actuator with a closed-loop spool control primarily used tocontrol work functions with above medium performance requirementsPVEA Series 6The PVEA functionality includes an electric circuit with a closed-loop logic. An integrated feedbacktransducer measures spool movement in relation to the input signal. The PVEA features passive faultmonitoring, LED indicating fault state, error output pin and Power Save mode.PVEA functionalityPower Save mode is entered when the command signal to the PVEA is below 15% of the supply voltage.Entering Power Save mode will torn off the power to the solenoid valves. Power Save mode can beidentified by the LED blinking green at 1 Hz.All variants available with following features:• Neutral position or max. spool stroke according to control signal• 11–32 VDC multi-voltage power supply• DEUTSCH connectors• Standard PVE pilot oil pressure of 13.5 bar [196 psi]• LED indicating error state and passive fault monitoring• Float (-F) and CAN-interface (-CI)Technical InformationPVG 16 Proportional Valve GroupPVG 16 Actuation80 | © Danfoss | December 2018 BC00000211en-000901
