Danfoss VLT 6000 HVAC Series Design Manual

Also see for VLT 6000 HVAC Series: Instruction manual Operating instructions Operating instructions Instruction manual Quick setup manual

Contents

Danfoss VLT 6000 HVAC Series Design Manual Manual pdf 100 page image

ProgrammingUsing the [EXTEND MENU] key, it ispossible to have access to all the pa-rameters for the frequency converter.Operation and Display 001-017This parameter group allows to set up parameterssuch as language, display readout and the possibilityof making the function keys on the control unit inactive.001 Language(LANGUAGE)Value:English (ENGLISH) [0]German (DEUTSCH) [1]French (FRANCAIS) [2]Danish (DANSK) [3]Spanish (ESPAÑOL) [4]Italian (ITALIANO) [5]Swedish (SVENSKA) [6]Dutch (NEDERLANDS) [7]Portuguese (PORTUGUESA) [8]Finnish (SUOMI) [9]State when delivered may vary from factory setting.Function:The choice in this parameter defines the language tobe used on the display.Description of choice:There is a choice of the languages indicated.The Setup configurationThe frequency converter has four Setups (parameterSetups) that can be programmed independently ofeach other. The active Setup can be selected in pa-rameter 002 Active Setup. The active Setup numberwill be shown in the display under "Setup". It is alsopossible to set the frequency converter to Multi-Setupto allow switching of Setups with the digital inputs orserial communication.Setup shifts can be used in systems where, one Setupis used during the day and another at night.Parameter 003 Copying of Setups enables copyingfrom one Setup to another.By means of parameter 004 LCP copy, all Setups canbe transferred from one frequency converter to anoth-er by moving the control panel. First all parametervalues are copied to the control panel. This can thenbe moved to another frequency converter, where allparameter values can be copied from the control unitto the frequency converter.002 Active Setup(ACTIVE SETUP)Value:Factory Setup (FACTORY SETUP) [0]Setup 1 (SETUP 1) [1]Setup 2 (SETUP 2) [2]Setup 3 (SETUP 3) [3]Setup 4 (SETUP 4) [4]MultiSetup (MULTI SETUP) [5]Function:The choice in this parameter defines the Setup numberyou want to control the functions of the frequency con-verter. All parameters can be programmed in fourindividual parameter Setups, Setup 1 - Setup 4.In addition, a pre-programmed Setup called the Fac-tory Setup exists. This only allows specific parametersto be changed.Description of choice:Factory Setup [0] contains the parameter values pre-set at the factory. Can be used as a data source if theother Setups are to be returned to a common state. Inthis case Factory Setup is selected as the active Set-up.Setups 1-4 [1]-[4] are four individual Setups that canbe selected as required.MultiSetup [5] is used if remote switching between dif-ferent Setups is required. Terminals 16/17/29/32/33and the serial communication port can be used forswitching between Setups.VLT® 6000 HVAC Series= factory setting, () = display text, [] = value for use in communication via serial communication port100 MG.61.B5.02 - VLT ® is a registered Danfoss trademark