Control unit LCPThe front of the frequency converter features a controlpanel - LCP(Local Control Panel). This is a completeinterface for operation and programming of the fre-quency converter.The control panel is detachable and can - as an alter-native - be installed up to 3 metres away from thefrequency converter, e.g. on the front panel, by meansof a mounting kit option.The functions of the control panel can be divided intofive groups:1. Display2. Keys for changing display mode3. Keys for changing program parameters4. Indicator lamps5. Keys for local operationAll data are indicated by means of a 4-line alphanu-meric display, which, in normal operation, is able toshow 4 operating data values and 3 operating condi-tion values continuously. During programming, all theinformation required for quick, effective parameterSetup of the frequency converter will be displayed. Asa supplement to the display, there are three indicatorlamps for voltage (ON), warning (WARNING) andalarm (ALARM), respectively.All frequency converter parameter Setups can bechanged immediately via the control panel, unless thisfunction has been programmed to be Locked [1] viaparameter 016 Lock for data change or via a digital in-put, parameters 300-307 Data change lock.Control keys for parameter setupThe control keys are divided into functions. Thismeans that the keys between display and indicatorlamps are used for parameter Setup, including select-ing the display indication during normal operation.[DISPLAY MODE] is used for selectingthe indication mode of the display orwhen returning to the Display modefrom either the Quick menu or the Ex-tend menu mode.VLT® 6000 HVAC Series92 MG.61.B5.02 - VLT ® is a registered Danfoss trademark
