Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual
Also see for VLT AutomationDrive FC 301: Programming guideInstallation guideOperating guideInstallation guideDesign guide
                                                                                    | |
Contents
| 
6 Application Set-up ExamplesThe examples in this section are intended as a quickreference for common applications.• Parameter settings are the regional default valuesunless otherwise indicated (selected inparameter 0-03 Regional Settings).• Parameters associated with the terminals andtheir settings are shown next to the drawings.• Required switch settings for analog terminals A53or A54 are also shown.NOTICEWhen using the optional STO feature, a jumper wire maybe required between terminal 12 (or 13) and terminal 37for the frequency converter to operate with factorydefault programming values.6.1 Application Examples6.1.1 AMAParametersFC+24 V+24 VD IND IND INCOMD IND IND IND IN+10 VA INA INCOMA OUTCOM12131819202729323337505354554239130BB929.10Function SettingParameter 1-29 Automatic MotorAdaptation(AMA)[1] EnablecompleteAMAParameter 5-12 Terminal 27Digital Input[2] CoastinverseNotes/comments:Set parameter group 1-2* MotorData according to the motor.D IN 37 is an option.Table 6.1 AMA with T27 ConnectedParametersFC+24 V+24 VD IND IND INCOMD IND IND IND IN+10 VA INA INCOMA OUTCOM12131819202729323337505354554239130BB930.10Function SettingParameter 1-29 Automatic MotorAdaptation(AMA)[1] EnablecompleteAMAParameter 5-12 Terminal 27Digital Input[0] NooperationNotes/comments:Set parameter group 1-2* MotorData according to the motor.D IN 37 is an option.Table 6.2 AMA without T27 Connected6.1.2 SpeedParametersFC+24 V+24 VD IND IND INCOMD IND IND IND IN+10 VA INA INCOMA OUTCOM12131819202729323337505354554239A53U - I-10 - +10V+-130BB926.10Function SettingParameter 6-10 Terminal 53 LowVoltage0.07 V*Parameter 6-11 Terminal 53 HighVoltage10 V*Parameter 6-14 Terminal 53 LowRef./Feedb. Value0 HzParameter 6-15 Terminal 53 HighRef./Feedb. Value50 Hz* = Default valueNotes/comments:D IN 37 is an option.Table 6.3 Analog Speed Reference (Voltage)Application Set-up Examples Operating InstructionsMG33AQ02 Danfoss A/S © 07/2015 All rights reserved. 316 6 |
Related manuals for Danfoss VLT AutomationDrive FC 301
Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 302 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 302 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 300 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 300 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 300 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 300 Operating Instructions Manual
Danfoss VLT Automation Drive FC 300 Operating Instructions Manual
Danfoss VLT AutomationDrive FC 301 Operating Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine