Danfoss VLT Compact Starter MCD 201 Installation Manual

Also see for vlt soft starter mcd 500: Installation instructions Installation instructions Installation instructions Installation guide Installation guide

Contents

Danfoss VLT Compact Starter MCD 201 Installation Manual Manual pdf 13 page image

6 OperationThe Modbus TCP Module must be controlled by a Modbusclient (such as a PLC) which complies with the ModbusProtocol Specification. For successful operation, the clientmust also support all functions and interfaces described inthis manual.6.1 Device ClassificationThe Modbus TPC Module is a Modbus server managed bya Modbus client over Ethernet.6.2 ConfigurationConfigure the device directly in the PLC. No additional filesare required.6.3 LEDsLED name LED status Description1 2TX/RX 2TX/RX 1Link 2Link 1ErrorStatusPower177HA627.10Power Off The module is not powered up.On The module receives power.ErrorOff No error.Flashing System error.On Communication error.StatusOff Not ready.Slow flash Ready, but not configured.Fast flash Configured and waiting for communication.On Communication has been established.Link x Off No network connection.On Connected to a network.TX/RX x Flashing Establishing connection.On Normal operation.Table 6.1 Feedback LEDsOperation Installation GuideMG17N102 Danfoss A/S © 10/2017 All rights reserved. 116 6