Danfoss VLT Decentral Drive FCD 302 Design Manual

Also see for vlt fcd 302: Installation guide Operating guide Operating instructions Programming guide Operating guide

Contents

Danfoss VLT Decentral Drive FCD 302 Design Manual Manual pdf 76 page image

Not all choices/options are available for each FCD 302variant. To verify if the appropriate version is available,consult the Drive Configurator on the Internet:http://driveconfig.danfoss.com.NOTEA and D options for FCD 302 are integrated into thecontrol card. Therefore pluggable options for frequencyconverters cannot be used here. Future retrofit will requireexchange of the entire control card. B options arepluggable, using the same concept as for frequencyconverters.5.1.1 Drive ConfiguratorDesign the frequency converter according to theapplication requirements by using the ordering numbersystem.Order standard drives and drives with integral options bysending a type code string describing the product to thelocal Danfoss sales office, for example:FCD302P2K2T4B66H1X1XMXCXXXXXA0BXXXXXXDXThe meaning of the characters in the string can be locatedin the pages containing the ordering numbers in thischapter. In the example above, a Profibus DP V1 and a 24V back-up option is included in the drive.From the Internet based Drive Configurator, configure theright drive for the right application and generate the typecode string. The Drive Configurator will automaticallygenerate an eight-digit sales number to be delivered tothe local sales office.Furthermore, establish a project list with several productsand send it to a Danfoss sales representative.The Drive Configurator can be found on the globalInternet site: www.danfoss.com/drives.The frequency converter will automatically be deliveredwith a language package relevant to the region fromwhich it is ordered.To order a different language package, contact the localDanfoss sales office.Type Code and Selection Gui... VLT® Decentral Drive FCD 302MG04H102 - VLT® is a registered Danfoss trademark 755 5