5.1.3 Accessory BagsU96 97 98L1 L2 L391 92 93V WRELAY 1 RELAY 103 02 0106 05 0410 1006 06130BT309.10130BT339.10130BT330.10130BA406.1061 68 639 42 50 53 54 503 02 01 06 05 04ABC DE FG H IJ KWARNING:Risk of Electric Shock - Dual supplyDisconnect mains and loadsharing before serviceISOA0021Enclosure type A1, A2 and A3 Enclosure type A56 Enclosure type B1 and B2 Enclosure type C1 and C26168 3942 5053 54RELAY 1RELAY 203 02 0106 0504130BT346.10WARNING:Risk of Electric Shock - Dual supplyDiscunnect mains and loadsharing before service61 683950 53 54 5420302010605049995130BT347.10WARNING:Risk of Electric Shock - Dual supplyDisconnect mains and loadsharing before service999561 683950 53 54 542030201060504130BT348.10Risk of Electric Shock - Dual supplyDisconnect mains and loadsharing before serviceWARNING:RELAY 1 RELAY 261 683950 53 54 542030201060504130BT349.10RELAY 1 RELAY 2WARNINGSTORED CHARGE DO NOT TOUCH UNTIL15 MIN. AFTER DISCONNECTIONCHARGE RESIDUELLE.ATTENDRE 15 MIN. APRES DECONNEXIONWARNING:Risk of Electric Shock - Dual supplyDisconnect mains and loadsharing before serviceEnclosure type B3 Enclosure type B4 Enclosure type C3 Enclosure type C41 + 2 only available in units with brake chopper. For the DC link connection (load sharing), connector 1 can be ordered separately (code no. 130B1064).An 8-pole connector is included in accessory bag for FC 102 without Safe Torque Off.Table 5.3 Parts included in Accessory BagsMechanical Installation Design GuideMG11BC22 Danfoss A/S © Rev. 06/2014 All rights reserved. 895 5