Danfoss VLT FC Series Operating Instructions Manual

Also see for VLT FC Series: Service guide Installation instructions Installation guide Installation instructions Operating guide

Contents

Danfoss VLT FC Series Operating Instructions Manual Manual pdf 12 page image

2 Pre-Installation2.1.1 Receiving InspectionInspect the packaging and equipment closely whenreceived. Any indication of careless handling by the carriershould be noted on the delivery receipt, especially if theequipment will not be immediately uncrated. Obtain thedelivery person’s signed agreement to any noted damagesfor any future insurance claims. Ensure that the modelnumber and power match the order and intended use forthe drive.NOTEIMPORTANT LOST OR DAMAGED GOODS INSPECT THISSHIPMENT IMMEDIATELY UPON ARRIVALIf goods are received short or in damaged condition, insiston a notation of the loss or damage across the face of thefreight bill. Otherwise no claim can be enforced againstthe transportation company. If concealed loss or damage isdiscovered, notify your carrier at once and request aninspection. This is absolutely necessary. Unless you do thisthe carrier will not entertain any claim for loss or damage.The agent will make an inspection and can grant aconcealed damage notation. If you give the transportationcompany a clear receipt for equipment that has beendamaged or lost in transit, you do so at your own risk andexpense. Danfoss IS WILLING TO ASSIST YOU TO COLLECTCLAIMS FOR LOSS OR DAMAGE, BUT WILLINGNESS ONOUR PART DOES NOT MAKE US RESPONSIBLE FORCOLLECTION OF CLAIMS OR REPLACEMENT OF MATERIAL.THE ACTUAL FILING AND PROCESSING OF THE CLAIM ISYOUR RESPONSIBILITY.Ensure that the model number and power match the orderand intended use of the drive.Danfoss Inc.Milwaukee, WI 53224, U.S.A.Tel.: +1 (800) 432-6367 Fax.: +1 (815) 639-8002Material No.: 174H2222Drawings: 176U8989Input Power: 480 VAC, 65.7 A, 3 Ø, 60 HzMotor: 460 VAC, 65 AShort Circuit Rating: 5 kA rms sym. at rated input V max.Envir. Rating: UL Type 1Max. Ambient: 45 °C/ 113 °FSerial No.: 018702Y097Humidity: 95 % Non-Cond.S301050T4E013CMM13XSXXZ1XGCXXXXXXXXXXXX0See information packet for installation instructions.130BX212.10321Illustration 2.1 Sample Panel Label1 Panel input rating2 Panel output rating3 Serial numberTable 2.1 Legend to Illustration 2.1Ensure that the model number and power match the orderand intended use for the drive.2.1.2 Pre-installation Check1. Compare option panel model number to whatwas ordered.2. Ensure each of following are rated for samevoltage:• Drive• Option panel• Power line• Motor3. Ensure that panel output rating is equal to orgreater than motor total full load current for fullmotor performance.• For multiple motor applications, add thefull load current ratings of all motors.• Motor power size and option panelmust match for proper overloadprotection.• If panel rating is less than motor, fullmotor output cannot be achieved.Pre-Installation Option Panel Operating Instructions10 MG14I102 - VLT® is a registered Danfoss trademark22