Danfoss VLT HVAC Drive FC 102 Operating Instructions Manual

Also see for VLT HVAC Drive FC 102: Operating instructions Service guide Programming guide Installation guide Installation guide

Contents

Group no. Parameter group27-** Cascade CTL Option29-** Water Application Functions31-** Bypass OptionTable 6.7 Parameter GroupsAfter selecting a parameter group, select a parameter withthe navigation keys.The middle section on the GLCP display shows theparameter number and name as well as the selectedparameter value.130BP067.10740RPM0 -01 Language[0] English10.64A 1 [1]0-0*Basic SettingsIllustration 6.19 Display Example6.1.7 Changing Data1. Press [Quick Menu] or [Main Menu] key.2. Press [▲] and [▼] to find parameter group to edit.3. Press [OK] key.4. Press [▲] and [▼] to find parameter to edit.5. Press [OK] key.6. Press [▲] and [▼] to select correct parametersetting. Or, to move to digits within a number,press keys. Cursor indicates digit selected tochange. [▲] increases the value, [▼] decreases thevalue.7. Press [Cancel] to disregard change, or press [OK]to accept change and enter new setting.6.1.8 Changing a Text ValueIf the selected parameter is a text value, change the textvalue with the [▲]/[▼] keys.[▲] increases the value, and [▼] decreases the value. Placethe cursor on the value to be saved and press [OK].130BP068.10740RPM0 -01 Language[0] English10.64 A 1 [1]0-0*Basic SettingsIllustration 6.20 Display Example6.1.9 Changing a Group of Numeric DataValuesIf the selected parameter represents a numeric data value,change the selected data value with the [◄] and [►] keysas well as the up/down [▲] [▼] keys. Press [◄] and [►] tomove the cursor horizontally.130BP069.101- 6*113 RPM 1.78 A 1(1)Load depen. setting1 - 60 Low speed loadcompensation100%Illustration 6.21 Display ExamplePress [▲] and [▼] to change the data value. [▲] increasesthe data value, and [▼] decreases the data value. Place thecursor on the value to be saved and press [OK].130BP070.101 - 60 Low speed loadcompensation1 0%Load depen. setting 1- 6*729RPM 6.21A 1(1)6Illustration 6.22 Display Example6.1.10 Changing of Data Value, Step-by-StepCertain parameters can be changed step by step orinfinitely variably. This applies to parameter 1-20 MotorPower [kW], parameter 1-22 Motor Voltage andparameter 1-23 Motor Frequency.The parameters are changed both as a group of numericdata values and as numeric data values infinitely variably.How to Programme Operating InstructionsMG16B202 Danfoss A/S © Rev. 06/2014 All rights reserved. 896 6