m Version 3.11 Manual RS.8A.N5.0 © Danfoss 10-007 7Language SelectionAnswerBaud RateDialModem Configuration When connected to a modem, use this option to configure the modem settings.From the Setup Menu, select the Modem Configuration option.Use the ‘ ’ or ‘ ’ keys to cycle through the valid baud rates to the requiredvalue and press ‘↵’ to move onto the next field.Enter the dial code you require. Use the ‘ ’and ‘ ’ keys to cycle through thecharacter list and the ‘‘and ‘‘ keys to move the cursor left or right respectively.Enter the answer code you require. Use ‘ ’ or ‘ ’ keys to cycle through thecharacter list and the ‘ ‘ or ‘ ‘ key to move the cursor left or right respectively.Note: Refer to your modem handbook for details of the valid modemcommands and answer codes.When you have finished or to abandon the operation, press ‘ ’ once toreturn to the Setup Menu and again to return to the Main Menu.The m supports several languages, as listed below:English Swedish HungarianFrench Norwegian PolishGerman Danish CzechDutch Icelandic FinnishItalian SpanishSelecting Change Language from the Setup Menu will present you with theappropriate list of languages for your unit. Selection of the required languagewill refresh the screen to display the Main Menu in the new language and willautomatically adjust the range of Diacritics (accented characters) available inEdit Fields.