Danish Interpretation Systems DCS 6000 User Manual

Also see for DCS 6000: User manual User manual User manual User manual User manual

Contents

Danish Interpretation Systems DCS 6000 User Manual Manual pdf 23 page image

DIS User ManualUser Manual DCS 6000 Digital IR System rev H.docx 233. Auxiliary audio inputs – Two femaleXLR connectors for extra audio inputs.They can be used to connect auxiliarysymmetrical audio signals such as amusic installation, the floor language oremergency messages.4. Audio signal inputs – 8 or 32 cinchplugs to connect external asymmetricalaudio input signals. The number ofconnectors depends on the transmittertype.5. Radiator signal loop-through input – AHF BNC connector to loop-through theradiator output of another transmitter.6. Radiator signal outputs – Six HF BNCconnectors, used to connect theradiators. Up to 30 radiators can be loop-through connected to each output. RG59Cable must be used.Installation4.2The transmitter can be placed on a table orinstalled in a standard 19” rack.When installing in a 19” rack the supplied 19”brackets shall be fixed to the front side of thetransmitter by unscrewing the crews holding thetop and button cover and then fix the bracketsusing the same screws.Connections4.3This chapter gives an overview of typical systemconnections using the DT 60xx rangetransmitter: Connecting the DCS 6000 Conference System Connecting other external audio sources Connecting an emergency signal switch Connecting another transmitterConnecting the DCS 60004.3.1Conference SystemThe transmitter is connected to DCS 6000Conference System directly to a CU 6105 or CU6110 or to an AO 6004 or AO 6008 Audio OutputUnit. Each AO 6008 can feed up to 8 ‘AudioSignal Inputs’ in the transmitter.Figure 4.3-A Connecting the DCS 6000 Conference System.Please refer to the individual DCS 6000 usermanuals for more information.Connecting other audio4.3.2sourcesThe transmitter has up to 32 audio inputs(depending on the transmitter type) to interfacewith external asymmetrical audio sources, suchas congress systems from other manufacturersor for music distribution.The audio signals (stereo or mono) areconnected to the audio input cinch connectors.