Danish Interpretation Systems DCS 6000 User Manual

Also see for DCS 6000: User manual User manual User manual User manual User manual

Contents

Danish Interpretation Systems DCS 6000 User Manual Manual pdf 33 page image

DIS User ManualUser Manual DCS 6000 Digital IR System rev H.docx 33Set monitoring options4.5.5The Monitoring sub-menu (2) is used to setwhich signal is sent to the monitoringheadphone output. It can be one of the inputs,one of the channels or no signal.When the sensitivity of one of the inputs is beingchanged in the Setup menu (4I, 4J or 4K), orwhen assigning inputs to channels (menu 4C, PerChannel), the monitoring output automaticallyswitches temporarily to that source, even whenthe option ‘None’ has been chosen.2 MonitoringOptions DescriptionIn. nn dd dB The signal from audio input “nn” isavailable on the monitoring headphoneoutputInput nr. “nn”: {00 ... 31}Volume: “dd” dB {-31 ... 0}Ch. nn dd dB The signal on channel “nn” is availableon the monitoring headphone output.Channel nr. “nn”: {00 ... 31}Volume: “dd” dB {-31 ... 0}Aux.L dd dB The signal on the Aux. Left input isavailable on the monitoring headphoneoutput.Volume: “dd” dB {-31 ... 0}AuxR dd dB The signal on the Aux. Right input isavailable on the monitoring headphoneoutput.Volume: “dd” dB {-31 ... 0}None dd dB The monitoring headphone output isswitched off during normal operation,but is active when the sensitivity of oneof the inputs is being changed.Volume: “dd” dB {-31 ... 0}When the headphone output is disabled (seesection 4.5.16), the output level can not bechanged and the level indicator is not visible.The ‘Source/volume’ screen also displays levelmeters (two for a stereo source, one for a monosource) for a visual indication of the actual signalstrength:= low level= highlevel=overflow.View version information4.5.6In the Enquiry sub-menu (3), versioninformation of the transmitter can be found. Thisinformation should be mentioned in servicerequests or failure reports.3 EnquiryOptions Description3A Serial Number Shows the serial number of thetransmitter board.3B HW Version Shows the version number of thetransmitter board.3C FPGA Version Shows the version number of theFPGA software of the transmitterboard.3D FW Version Shows the version number of thetransmitter firmware.2 MonitoringIn. 04 -9 dB3A Serial NumberFC.0.0012D