106Figure 3-94 Export: Please connect the peripheral device first and then go to the following interface. ClickExport button, user may see there is a corresponding “Config_Time” folder. Double click the folder,user may view some backup files. Import: Here user may import the configuration files from the peripheral device to current device.You need to select a folder first. User may see a dialogue box asking you to select a folder if you areselecting a file. System pops up a dialogue box if there is no configuration file under current folder.After successfully import, system needs to reboot to activate new setup. Format: Click Format button, system pops up a dialogue box for you to confirm current operation.System begins format process after you click the OK button.Note: System can not open config backup interface again if there is backup operation in the process. System refreshes device when you go to the config backup every time and set current directory asthe root directory of the peripheral device. If you go to the configuration backup interface first and then insert the peripheral device, please clickRefresh button to see the newly added device.3.13.3 Backup Loga) From Main menu->Info->Log, the interface is shown as below. See Figure 3-95.
