Dantherm Cooling HEXFLOW PINNACLE Series Product Information Manual
              | |
Page 3 of 141. GENERAL SAFETY & WARNING INSTRUCTIONS Certain parts of electrical systems are inevitably live or have high operating temperatures.Observe caution at all times. Failure to observe these conditions and installation instructions can cause injury and damage. The system is to be installed and maintained only by trained and qualified personnel. Do not apply power until all ground connections have been made. The unit is fitted with pressed and folded metal parts, which could have sheared metal edges. Becautious handling the unit, especially when working in poorly accessible places. Check that no tools, test equipment, torches etc. have been left in or on the equipment oncompletion of work. Ensure the cover(s) and all mounting hardware is firmly secured before leaving installation. All cable and connectors must conform to UL standards. The heat exchanger is UL recognized and tested to UL1995. It will comply where necessary withthe safety requirements as defined in UL1995.2. UNPACKING, HANDLING & INITIAL INSPECTIONThe heat exchanger should be inspected on initial delivery and any damage to packaging noted. Theunit should be maintained in the upright position at all times. Special consideration should be given tocorrectness of external packing damage or abrasion, loose components and surface marks. Any damageshould be added to the freight bill and immediately notify the freight company for filing a freightclaim. All packaging materials should be retained for inspection.Do not attempt to operate the unit if it appears to be damaged.Dantherm Cooling , Inc. Heat Exchanger Operating & Maintenance ManualHexFlow Pinnacle Series Product Information Manual |
manualsdatabase
Your AI-powered manual search engine