Tally Dascom 2610254.2.4 Setup modeIn this mode, the following settings are available:■ Setup key: Sets the printer to setup mode, in which thefollowing settings can be selected.■ Menu key (1): Other menu settings. Access may bedisabled by menu settings (see note below).■ Adjust key (2): Sets the Tear position and first printing line(TOF). If you have the PullTr (Pull - Tractor) selected Adjustis not available.■ Char key (4): Sets the font and the number of characters perinch temporarily.Access to the other menu settings (Menu) may be disabled by the manufacturer.Proceed as follows to release this lock temporarily.1) Switch off the printer for approx. 5 seconds.2) Switch the printer on again keeping the Setup key pressed.4.2.5 Power on functionsIf you keep one of the following keys pressed during power-on until the printer has completedinitialization, the corresponding function is activated:◆ If you keep the Online key depressed while turning on the printer, you enter the printer’sadvanced menu mode. The advanced menu mode is described in the section 5.4.2 of thismanual.◆ If you keep the Setup key depressed while turning on the printer, you regain access to theprinter menu if you had locked it before with the help of the Menu Lock function.◆ If all four function keys (keys 1 to 4) are depressed simultaneously while turning on thepower, all printer settings are reset to the default values, except the Forml (Form length)setting in advanced menu mode.◆ Holding Function key 4 while turning on the printer prints out the parameter settings.
