Tally Dascom 2610465.5 Display messagesIf the printer detects an internal fault or user error or if it expects you to do something, amessage will appear in the LC display (LED’s display message reference below table 5.6.1).It also displays the status during an operation (e.g. Initializing). Below you will find a list ofmessages with brief descriptions of each message.5.5.1 Messages LED PanelLED Messages Error/Power ON Online Tractor Speed Pap.Out Power/Err.Hardware Alarm blink blink blink blink blinkSwitch Paper lever(intermediate beep) Off normal normal blink blinkPaper Width Error blink off blink blink blinkEEPROM Error blink blink off blink blinkSerial Interface Error blink blink blink off blink“Printhead Hot” Message blink off off blink blink“Check Ribbon” Message blink off off off blinkSerial Boot Mode on on off on OffParallel Boot Mode on off off on offRAM Error off on on on offMissing FPGA off on on on onMonitor Mode for ROMDebugger on on on off offWrong Header (temporary) on off off off offSensor Controller (ST8) Error off off on on offFirmware Download IsRunningOne lit LED is moving around in a circle, the othersare offIf one of the messages cannot be removed by power cycling the printer call yourservice.
