DataBay AVE-301T User Manual

Also see for AVE-301R: User manual User manual

Contents

DataBay AVE-301T User Manual Manual pdf 10 page image

VGA and Audio Cat-X AV Extender10 / 16(3) Function Test: Turn on your AV device, the POWER LED should turn ongreen to indicate the Power On status and the LEDs above RJ-45 will blinkbefore VGA signal is turned On and remain On after VGA signal is turned On.5.2 Receiver AVE-301R installation and UTP Connection:(1) Site Selection: Please place Receiver in an appropriate place and have theUTP cable settled for later connection; you can use magnetic pad to attachthe unit on metal plane or use attachable rack mounting kit to fix the uniton selected area by screw or nail.(2) Power Up: Plug power adapter to the Receiver and connect monitor andspeaker to the “VGA OUT” and “AUDIO” port. The POWER LED will turn ongreen to indicate the POWER ON status and the LED above RJ-45 portshould blink to indicate the AV signal unconnected status.(3) Selection of UTP Cable: For best VGA resolution, please use Cat5Enhanced cable (350MHz bandwidth) for connection, please noted that themaximum extended length of one section (one pair of Transmitter orReceiver) should not exceed 300 meters. The connector must be made by568B/568B type.PAIR 3PAIR 2 PAIR1 PAIR41 2 3 4 5 6 7 8Jack Position(4) Connect UTP Cable:Installation Diagram of Receiver AVE-301RThe EIA/TIA definition of 568B in thepin assignment is (1)orange white,(2)orange, (3)green white, (4)blue,(5)blue white, (6)green, (7)brownwhite, and (8)brown.