DataCard SD260 Installation And Administration Manual

Also see for SD460: Installation and administrator's guide User guide User guide Quick install guide Quick install guide

Contents

DataCard SD260 Installation And Administration Manual Manual pdf 74 page image

66 Printer ManagerEach overlay type has a preferred temperature that allows it to best adhere tothe card. For example, if the default temperature is 160 degrees Celsius, andthe overlay type you are using runs at 175 degrees Celsius, enter 15.• UserOverlay1Name, UserOverlay2Name, UserOverlay3Name,UserOverlay4Name—These settings allow you to specify a user‐defined namefor an overlay type, based on the overlay named in OverlayDisplayedName.You then can override the settings for the specified overlay.Update PasswordWebAdmin access‐level personnel can specify to password protect PrinterManager and limit access to the advanced settings. Adding password protection isthe preferred method of restricting access to Printer Manager. If no password isassigned, a password is not needed to log on to Printer Manager.1. Select the access level for which you want to assign a password. TheWebAdmin access level can update the WebAdmin, WebUser, SNMP read,and SNMP write passwords.2. Enter the current password. If the current password field is blank (no entry),leave this box blank.3. Enter the new password in the corresponding field. To remove a password,leave this field blank.4. Enter the new password again to confirm it. Leave the field blank if you areremoving the password.5. Click Update Password to apply the changes.The OverlaySpeed and OverlayTemp settings work together to determine howwell the overlay is applied. You might have to laminate several cards to find thespeed and temperature settings that work best for your card type.Description ValueChoose Username to Update WebAdminCurrent PasswordNew PasswordConfirm New Password