DataCard SD260L Installation And Administrator's Manual

Also see for SD460: User guide Installation and administration guide User guide Quick install guide Quick install guide

Contents

DataCard SD260L Installation And Administrator's Manual Manual pdf 112 page image

100 Supplies and PartsCables and Power SuppliesThe printer uses the following data cables and power supplies.Data CablesThe data cable connects the printer to the network or directly to a PC. You can use one of thefollowing data cables: USB Network (Ethernet)Use only one type of data cable with a printer. If you need to connect more than one PC to aprinter, use a network connection.USB CableUse a USB data cable, 6 feet (2 meters) long, to connect the printerto the PC. Be sure to use a cable rated for USB 2.0 datatransmission.Network CableUse a standard Ethernet network cable, also called a Category 5 or Cat 5 cable, to connect theprinter to a network port.USB Smart Card CablePrinters that have a loosely coupled smart card reader use a USB data cable, up to a maximum of6 feet (2 meters) long, to connect the smart card reader in the printer to the PC.Power SuppliesYou can order the following power supplies: Printer—the printer power supply is rated as follows: Input: 110–240V, 50–60Hz, 1.5A Output: 24V, 3.0A, 72WIt is self-adjusting within the rated input voltage.Ethernet cables are not available from Entrust Datacard. You can purchase a cablefrom a third-party supplier.