96-30051-001 Rev. D3 DDN SFA12K (SFA OS 2.3.1) Hardware Installation & Configuration Guide | 99Disk Enclosure CablingFigure 115. SFA12KXE/12K-20E Configuration with 10 x SS8460 Enclosures002I/O Module ADisk Enclosure 01102I/O Module B012I/O Module ADisk Enclosure 02112I/O Module B010I/O Module ADisk Enclosure 03110I/O Module B020I/O Module ADisk Enclosure 04120I/O Module B022I/O Module ADisk Enclosure 06122I/O Module B000I/O Module ADisk Enclosure 05100I/O Module B013I/O Module ADisk Enclosure 10113I/O Module B003I/O Module ADisk Enclosure 09103I/O Module B021I/O Module ADisk Enclosure 08121I/O Module B001I/O Module ADisk Enclosure 07101I/O Module B020 021 022010 012 013000 001 002 003Controller 0120 121 122110 112 113100 101 102 103Controller 1Optional—If you are using 3-meter cables only:- Remove side panels from the adjoining sides of racks.- Run cables from the back of the controllers into the channels on theright and left of each rack at the same altitude as the controller.No. of HD Mini-SAS to HD Mini-SAS Cables Required:3-meter: 106-meter: 10Use 6-meter cables to connectthese ports to the controllerinstalled in the other rackZoning Configuration: 0
