DataLocker DL3 User Manual

Also see for DL3: User guide User manual Setup guide User guide

Contents

DataLocker DL3 User Manual Manual pdf 27 page image

27AUTO-LOCKAuto-lock is a security feature available on the DL3 FE™. This feature is disabledby default but can be enabled by the administrator and the user. The amountof idle time required to time out the device is configurable from 10 to 180minutes in increments of 10 minutes.Auto-lock will disconnect the drive once it is idle (i.e. zero activity) for theconfigured amount of time. The device will beep and display a 30 secondcountdown on the touchscreen before the timeout limit is reached. Modifyingthe contents on the drive or even viewing the files will reset the timeout counter.To enable auto-lock, follow these steps:Step 1: Connect the DL3 FE™ drive to your computer.Step 2: Enter the administrator password and press the[↵] symbol.Step 3: Press the [SETUP] button on the touch screen.Step 4: At the setup menu, press the [SYSTEM] button.Step 5: Press the button two times to arrive at the[SYSTEM 3/3] screen.Step 6: Select [AUTO-LOCK].Step 7: Adjust the minutes of idle time required.Step 8: Change to [ENABLE].