Handbuch Datafox EVO 3.5 Pure Seite 96 Datum: 06.08.2018 Version: 04.03.07.XX5.9.7.3. Description of the table „Action2"The switching from „Action“ to „Action2“ it’s a setting in the StudioIV.Name Data type Length DescriptionID Number(int) 4 Action number, it can occur several times due to several actions that have to beworked through.RefGroup Number(int) 4 Only work this action for the listed Group.0 = for all groups work this action.RefTime Number(int) 4Give a time, and only works this action to this time.(0 = works ever)! Not mixed with times in RefTimeRelais!RefReaderRelaisNumber(int) 4 Reference to the list reader, action to switch a relay on this listed reader in tablereader.PortOut Number(Byte) 1 Switch relay 1 or 2Elapse Number(int) 6Specifies the period of time a relay is switched! The time is in seconds!When (-1) is specified, the relays are reset directly.With (0) the relays switch for the duration specified for the relay with RefTime."FRA" activates Free Access"BLA" activates Blocked Access = permanent red signal"STD" returns to Standard mode.= Deactivate from FRA or BLARefReaderLED Number(int) 4 This is a reference to the table Reader to switch the LED on other modulesRefTimeRelais(nur für Auto-matischeZeitsteuerung)Number(int) 4The time model indicates when the output may be switched. (0 = not used).(Automatic time control)! Action how here work with automatic times, be not mixed with action from theaccess!! Caution:By transferring the table "Action 2" to the unit, the table "action" is replaced. Thus, onlyentries in the table "Action 2" will be considered.! Caution:Would you like to continue working with the "action" table, the table "Action 2" may notbe transferred to the device.A table "Action 2" has already been transferred to the device, it must be cleared by load-ing a new setup.
