Handbuch Datafox EVO 3.5 Pure Seite 74 Datum: 06.08.2018 Version: 04.03.07.XXconnector 4 polesaccess controlBus plug:5.9.4.11. Connection of the EVO-Access reader plusOn the backsite is a multicore cable.The connection as fallows:Nr. color function1 red +12V Power Input (10 - 30V DC)2 blue ground Power Input3 yellow RS485 - B4 green RS485 - AI/O-ErweiterungHousing Structure Front panel made of aluminium and glass, capacitive touch,rear housing shell plastic: ABSDimensions ( width x height x depth ) 85 mm x 208 mm x 27 mm, ca. 20mm additional in flush mountingWeight Basic device 570g plus wall mount plate 170gDisplay LCD TFT: 320 x 480 Pixel, active area 49,0 x 73,4 mm with LED-BacklightBacklit transponder symbol 3-coloured white, green, redKeys Type, size Keyboard on touch screen, touch area 73,4 x 49,0mmIndividualization Individual graphics User information configurable by customer specific graphicsIntegrated backlight Individual printable front glass with backlight 56 x 37mmColour always like transponder symbolPower supply 10 - 30V DC, max. 500mAInstallation Stainless steel mounting plate, reader is clipped into the plate and securedEnvironment values Ambient temperature, Protection -20 ° C to +70 ° C, IP65Communication RS485-interface, phg_crypt, 16 bus addresses and termination resistor configurable with menuSabotage sensor Sabotage detection with distance control to wall mount plateOptions Door module Extension module with relay (SPDT) and one digital inputThis extension should not be used in unsecured area.Transponder systems 125kHz Mifare LegicHitag 1+2+S Mifare Classic Legic primeUnique EM4102 Mifare Desfire Legic advantTitan EM4450 Mifare UltralightNr. color function5 white Relay common6 brown Relay normaly open7 gray Relay normaly close8 violet Digital in, plus pole9 black Digital in, groundSupply 12 – 30 V- +
