Manual Datafox ZK-Box V4 page 35 date: 16.01.2018 Version: 04.03.06.XX5.5. Mounting of the Box Devices5.5.1. Mounting on a wallexploded view complete viewMontageablauf:1. Insert the two dowels into the wall at intervals of 70mm.2. remove mounting blocks from the transport grid and mount them into the box as shown.Attention: pay attention to correct alignment!Put screws through the mounting blocks and mount the unit on the wall.5.5.2. Mountening with a snap clipA mounting clamp for top-hat rails can be ordered as an option for the devices.Item Number: 119401Rear view of the mountedbox on a hat-railThe mounting clamp isfactory-installed:Example application:ZK-Boxes installed in anelectrical distribution board.
