Datalogic C-BOX 300 Installation Manual

Also see for C-BOX 300: Installation manual

Datalogic C-BOX 300 Installation Manual Manual pdf 24 page image

C-BOX 300/31022.5 PROFIBUS CONNECTIONS AND SETUP2.5.1 Profibus Node Address SelectionTo interface the C-BOX 3X0 with a Profibus network, the Node Address should beset using the rotary switches placed in the cover inside.The valid address range is from 000 to 126.If an invalid value is detected, the C-BOX cannot communicate with the Profibusnetwork.The Node Address can also be assigned through WinHost. Refer to Help on-Line.Figure 11 - Rotary Switches2.5.2 Profibus Connector (9-Pin Female External Connector)To connect C-BOX 3X0 as a Profibus DP Slave, use a standard Siemens Profibuscable with a 9-pin male connector (see DIN 19245 part 1) and plug it into the 9-pinfemale external connector.5 19 6HUNDREDS TENS UNITS12