Datalogic CBX500 Installation Manual
Also see for CBX500: Installation manualInstallation manualInstruction manual
               | |
CBX500 INSTALLATION MANUAL6MECHANICAL INSTALLATIONCBX500 can be mounted to various wooden or plastic surfaces using the two self-threading screws (3.9 x 45 mm)and washers provided in the package.Mounting to other surfaces such as concrete walls or metallic panels requires user-supplied parts (screws, screwanchors, nuts, etc). A mounting template is included in the package to facilitate hole drilling alignment.CBX500 can also be mounted to a DIN rail or a Bosch Frame using the following mounting accessories: BA100(93ACC1821), BA200 (93ACC1822).The diagram below gives the overall dimensions of the CBX500 and shows the two mounting through-holes.178[7.01]82.9[3.26]80.9[3.18]4[0.16]4[0.16]71[2.8]180[7.1]193[7.6]30.7[1.21]Figure 1 - Overall DimensionsELECTRICAL CONNECTIONS AND SETUPThe following figure shows the typical layout.Figure 2 – System LayoutThe dotted line in the figure refers to an optional (temporary) hardware configuration in which a portable PC canbe quickly connected to the CBX500 (and consequently to the reading device auxiliary interface) through theinternal 9-pin connector. This allows monitoring of the data transmitted by the reading device or configurationReading DeviceConfiguration PCPWRScannerCBX500ScannerAuxiliaryInterfacePS, I/O, Main InterfaceMountingHolesmmin |
Related manuals for Datalogic CBX500
manualsdatabase
Your AI-powered manual search engine