Datalogic CBX800 Installation Manual

Also see for CBX800: Instruction manual

Contents

Datalogic CBX800 Installation Manual Manual pdf 19 page image

CBX800 INSTALLATION MANUAL19AUXILIARY INTERFACEAll CBX800s have an RS232 auxiliary interface available on the 9-pin connector below, which can be linked toanother host computer or an external system. This interface is mainly used for CBX800 configuration throughGenius™, the multilanguage software tool. Diagnostics and program downloading can be performed from thisinterface.Connections can be made to a PC or Laptop using a straight through cable or a USB-RS232 converter.5 169Figure 20 - 9-pin D-Sub Female ConnectorWith reference to the 9-pin connector of Figure 20, the following pins are used to connect the RS232 auxiliaryinterface:Pin Name Function2 TX Auxiliary Interface Receive Data3 RX Auxiliary Interface Transmit Data5 SGND Signal Ground1, 4, 6, 7, 8, 9 N.C.RX TXReferenceUSER INTERFACEFigure 21 - RS232 Auxiliary Interface ConnectionsNOTEDo not connect the Aux Interface to the CBX spring clamp connectors and the 9-pinconnector simultaneously.