Datalogic CBX800 Installation Manual

Also see for CBX800: Instruction manual

Contents

Datalogic CBX800 Installation Manual Manual pdf 33 page image

CBX800 INSTALLATION MANUAL33TECHNICAL FEATURESELECTRICAL FEATURESSupply Voltage 10 to 30 Vdc*Consumption 0.8 - 0.5 ALimited Current ConsumptionCBX + reading device consumption(see related manual)2.5 ACOMMUNICATION INTERFACESHost Interface RS232/RS485 up to 115.2 Kbit/sAuxiliary RS232 up to 115.2 Kbit/sData Source RS232/RS485 up to 115.2 Kbit/sID-NET™ RS485 Half Duplex up to 1 MbaudCommunication Protocols Datalogic Application Driver (DAD Driver)USER INTERFACELED Indicators Power On/Polarity Error (blue/red)Trigger (yellow)IN2 (green)OUT1 (yellow)OUT2 (green)Ready (green)Host (yellow)Source (green)ID-NET (yellow)OUT3 (green)Configuration Modes Genius™ utility programGenius™ based Host Mode ProgrammingPHYSICAL FEATURESMechanical Dimensions 193 x 180 x 71 mm(7.6 x 7.1 x 2.8 in.)Weight 830 g. (29.28 oz.)ENVIRONMENTAL FEATURESOperating Temperature 0° to 50 C (+32° to 122 °F)Storage Temperature -20° to 70 C (-4° to 158 °F)Humidity max. 90% non condensingVibration Resistance 14 mm @ 2 to 10 Hz; 1.5 mm @ 13 to 55 Hz;EN 60068-2-6 2 g @ 70 to 200 Hz; 2 hours on each axisBump Resistance 30 g; 6 ms;EN 60068-2-29 5000 shocks on each axisProtection ClassEN 60529IP65 **The features given are typical at a 25 C ambient temperature (if not otherwise indicated).* for further details about minimum/maximum supply voltage refer to the manual of the connected readingdevice, since the minimum supply voltage required may be >10.** when compression connectors and reading device are correctly connected.If Host Interface (Fieldbus) Modules are used, only correctly installed IP65 models guarantee IP protection.Protection is not guaranteed when Standard Fieldbus Modules are mounted.

/ 35

Related manuals for Datalogic CBX800