Datalogic DS6500 Reference Manual

Also see for DS6500 Series: Installation quick reference

Datalogic DS6500 Reference Manual Manual pdf 48 page image

DS65003422.6.2 “45° Skew” InstallationThe DS6500 scanner is mounted on the ST-210 90° mounting bracket (see Figure 18). Byadjusting the mounting bracket guides, reach 45° for the Skew angle (S in the figure below)to avoid the direct reflection of the laser light emitted by the scanner:Figure 57 – 45° Skew InstallationATTENTIONIf using the “45° Skew” installation, it is not guaranteed that the scannerreading performances (see reading diagrams in par. 4.4.1) will matchthose measured for the standard installation with Skew angle between10° - 20°.NOTEThe ST-210 mounting bracket is an accessory of the DS6500 standardmodel available in the US-60 kit (890001020).2.7 TYPICAL LAYOUTSThe following typical layout refers to the system hardware configurations, but it also requiresthe correct setup of the software configuration parameters (see par. 3.2.1 for details).Other layouts require the use of DS6500 scanner having a specific decoder base.The accessories and cables indicated in the following figures are Datalogic products. Wesuggest their use to guarantee the correct system functioning.2.7.1 Point-to-PointUsing a Point-to-Point layout, the data is transmitted on the Main interface as well as on theAuxiliary interface. The Main interface can be selected for RS232 or RS485 full-duplexcommunications.Two different layouts are available according to the DS6500 reader model used for theconnection.45º S