Datalogic Dragon D151 Reference Manual

Also see for Dragon D151: Quick reference guide

Datalogic Dragon D151 Reference Manual Manual pdf 29 page image

READING PARAMETERS23AIMING SYSTEMThis parameter sets the duration the aiming pattern is seen before a scan attemptbegins. It is programmable in 0.1 second increments from 0.0 to 9.9 seconds. No aimpattern is visible when the value is 0.0.To set the aiming system, scan the barcode below. Next scan the two NumericBarcodes in Appendix C that correspond to the desired aiming system duration.Single digit values must be predefined by a leading zero. For example, to set anaiming system duration of 0.5 seconds, scan the barcode below, then scan the “0”and “5” barcodes. To change the selection or cancel an incorrect entry, scan theCANCEL barcode in Appendix C.iaKkiaKkiaKkAIMING SYSTEMBEEP AFTER GOOD DECODEScan this symbol to set the reader to beep after a good decode.iaPkiaPkiaPkBEEP AFTER GOOD DECODEScan this symbol to set the reader not to beep after a good decode. The beeper stilloperates during parameter menu scanning and indicates error conditions.iaHkiaHkiaHkDO NOT BEEP AFTER GOOD DECODE