Datalogic Dragon Reference Manual

Also see for Dragon: Reference manual

Contents

Datalogic Dragon Reference Manual Manual pdf 25 page image

INSTALLATION1322.8.3 Wall MountingFor wall mounting, the base must bereversed 180° with respect to thecradle top. Position the base so that thethick part with the weighted plate istowards the bottom, as shown below.1. Unscrew the cradle fixing screwand detach the cradle from thebase by holding the base tight andpushing the cradle backwards.2. If you are installing several cradles and you desire to align them, you can usethe alignment plate (see Alignment Plate Installation), otherwise continue withstep 3.3. Using the mounting holes on thebase as a pattern, mark the wallwhere you desire to mount theOM-DRAGON™.4. Drill three appropriate size holes.5. Insert the threaded dowels into theholes.6. Position the base on the wall andaffix it by means of the threescrews.7. Reattach the cradle body by slidingit along the mounting tabs untilaligned.8. Fix the cradle to the base bymeans of the fixing screw (see above photo).9. Insert the antenna into the appropriate hole on the body of the cradle and screwit clockwise until tight.Cradle Fixing Screw