Datalogic Gryphon D432 Reference Manual

Also see for Gryphon D432: Quick reference guide Product reference guide Reference manual Quick reference guide Quick reference

Contents

Datalogic Gryphon D432 Reference Manual Manual pdf 25 page image

INITIAL SETUP134.3 USB INTERFACE SELECTIONThe Gryphon™ D432/D432E reader requires the USB interface cable (CAB-412)and, if required, the AC/DC power adapter to be connected.The USB interface is compatible:Windows 98 (and later) IBM POS for WindowsMac OS 8.0 (and later) 4690 Operating SystemSTART-UPAs with all USB devices, upon connection, the Host performs several checks bycommunicating with the Gryphon™ D432/D432E. During this phase the green LEDon the Gryphon™ D432/D432E reader blinks and normal operations are suspended.Two basic conditions must be met before Gryphon™ D432/D432E is ready to readcodes: the correct USB driver must be loaded and sufficient power must be suppliedto the reader.For all systems, the correct USB driver for the default USB-KBD interface or the USBGeneric HID interface is included in the Host Operating System and will either beloaded automatically or will be suggested by the O.S. and should therefore beselected from the dialog box (the first time only).If the Host supplies sufficient power to the reader, the start-up phase ends correctly,the green LED stops blinking and the reader emits the beep OK signal.If the Host does not supply sufficient power to the reader, a dialog box will appear onthe Host and the reader will be blocked (green LED continues blinking). In this case,disconnect the USB cable at the Host (green LED stops blinking), connect andpower-up an external supply to USB cable then reconnect the USB cable to the Hostand close the dialog box. The reader emits the beep OK signal. You can now readcodes. At this point you can read the USB interface configuration code according toyour application. Load drivers from the O.S. (if requested).When configuring the USB-COM interface or DLBulkUSB interface, the relevant filesand drivers must be installed and can be downloaded from the web sitehttp://www.scanning.datalogic.com.The reader is ready.