1.6.7 Stylus CalibrationYou might need to recalibrate the touch screen (i.e. when you attempt to select oneitem with the stylus, another item is erroneously selected).To recalibrate the touch screen, complete the following steps:1. Select Start > Settings > System > Screen to open the ScreenSettings dialog as shown in the figure below:2. Tap Align Screen to open the Calibration screen shown in the figure below.3. Carefully press and briefly hold stylus on the center of the target. Repeat as thetarget moves around the screen.4. By completing the calibration procedure you implicitly accept the new calibrationsettings.5. New calibration settings are persistently saved in registry.
