Removing a PasswordTo remove a password:1. Enter blanks in both “Password” fields.2. Select/tap “Set Password”.Password Request Dialog BoxOnce the password is set, the next time you open the “Datalogic Desktop Utility”, theDDU Password dialog box opens.This dialog box will only open if a password was defined.1. Type in your password using either the keypad on the unit, or using the stylus onthe soft input panel (SIP).If you enter an incorrect password, the system will prompt you to input the cor-rect one.2. Select/tap “OK” to verify the password. Or tap “X” to cancel.
